|
click
here to view a printable information page for this pattern in a new window --
you must have Acrobat Reader to view this file
There are three styles of hats, a hood, a headband
and socks. We recommend using heavyweight stretch knits such as Polarfleece®.
The only notion you will need is thread unless otherwise specified.
Body Measurements
| Size |
XS |
S |
M |
L |
XL |
|
Head
Circumference |
19 (48) |
20 (51) |
21 (53) |
22 1/2 (57) |
24 (61) |
"(cm) |
| Length of Foot |
7 1/2 (19) |
8 1/4 (21) |
9 (23) |
9 3/4 (25) |
10 1/2 (27) |
"(cm) |
View A is a twisted three peak
hat made in three colours. It ties and has a double band that covers the ears.
Fabric requirements:
Colours I and II 60” (152 cm) wide fabric (minimum width)
Sizes XS-S-M: 3/8 yard (0.35 m)
Sizes L-XL: 1/2 yard (0.50 m)
Colour III 20” (50 cm) wide fabric (minimum
width)
Sizes XS-S-M: 3/8 yard (0.35 m)
Sizes L-XL: 1/2 yard (0.50 m)
View B hat has a fold-up cuff
and ties threaded through a loop and tied into a bow to gather the top of the
hat. The ends of the ties have pom-poms. This hat is made from a single layer of
fabric and the wrong side of the fabric will show when the cuff is folded up.
Fabric requirements: 26” (66 cm) wide fabric
(minimum width)
Sizes XS-S-M: 3/8 yard (0.35 m)
Sizes L-XL: 1/2 yard (0.50 m)
You will also need 3/4 yard (0.70 m) of trim or
ribbon that is 5/8” - 1” (1.5 cm - 2.5 cm) wide and two pom-poms.
View C is a stocking cap with a
roll-up cuff. The hat is single layer and the wrong side of the fabric will show
when the cuff is rolled up. All sizes require 1/2 yard (0.50 m) of 26” (66 cm)
wide (minimum width) fabric.
View D is a double layer
headband with a Velcro® closure. The outside edges are finished on a serger
machine or with zigzag stitches on a standard sewing machine. Each layer
requires 1/8 yard (0.15 m) of 26” (66 cm) wide (minimum width) fabric for all
sizes. You will also need 2” (5 cm) of 1 1/2” (4 cm) wide Velcro®.
View E hood covers the head and
and the neck. It has an opening for the eyes. The opening is finished with a
binding made from swimwear fabric. All sizes require 5/8 yard (0.60 m) of 33”
(84 cm) wide (minimum width) fabric. You will need a 3” x 16” (7 cm x 40 cm)
piece of swimwear fabric with the greatest degree of stretch on the length of
the piece.
The single layer socks in View F
are finished at the top edges on a serger machine or with zigzag stitches on a
standard sewing machine.
Fabric requirements: 38” (95 cm) wide fabric
(minimum width)
Sizes XS-S-M: 1/2 yard (0.50 m)
Sizes L- XL: 5/8 yard (0.60 m)
| 
pat-003-811-2527
