|
Chef's Hat, Oven Mitt, Pot Holder, Napkins,
Placemats, Round Tablecloth & Toaster Cover patterns/instructions are all
included in this pattern.
CAUTION:
When making the potholder pattern, SewThankful.com recommends using
heat-resistant fabric and extra layers of cotton
batting or padding (NOT POLYESTER) to prevent possibility of burning through the
layers when using to hold/move hot dishes, etc.
Tracy feels polyester batting is not sufficient protections, PLEASE use your
discretion and test samples for adequate protection before using to lift or move
a hot dish. Consumer assumes all
responsibility for appropriate materials selection and construction
to prevent possible burn accidents.
We
recommend using Insul-Bright insulated lining in the construction of this
project.
Click
here to read more about Insul Bright insulated lining.
|
CHEF'S HAT
|
|
The hat has Velcro closure
and the size is adjustable. Use light to medium weight woven fabric.
|
|
Fabric 45" (115 cm)
Wide - 7/8 yd (0.80 m), 3" (8 cm) of 1 1/2" (4 cm) wide
Velcro, thread.
|
| |
|
OVEN MITT
|
|
Use light to medium weight
woven fabric, instructions are included for quilting fabric.
|
|
Fabric, lining and polyester
fleece each 45" (115 cm) Wide - 3/8 yd (0.35 m), 5/8 yd (0.60 m) of
bias tape, thread.
|
| |
|
POT HOLDER
|
|
The pot holder has a pocket
and is finished with bias tape. Use medium to heavy weight woven fabric,
instructions are included for quilting the fabric. CAUTION:
When making the potholder pattern, SewThankful.com recommends
using heat-resistant padding such as Insul-Bright and extra layers of cotton
batting or padding (NOT POLYESTER) to prevent possibility of burning
through the layers when using to hold/move hot dishes, etc.
Tracy feels polyester batting is not sufficient protections, PLEASE use
your discretion and test samples for adequate protection before using to
lift or move a hot dish. Consumer
assumes all responsibility for appropriate materials selection and
construction
to prevent possible burn accidents.
|
|
Fabric 45" (115 cm)
Wide - 3/8 yd (0.35 m), 1/4 yd (0.25 m) of polyester fleece
13" (30 cm) wide (minimum width), 1 1/8 yd (1.05 m) of bias tape,
thread.
|
| |
|
NAPKIN
|
|
15" (38 cm) square
piece of fabric for each, thread.
|
| |
|
PLACEMATS
|
|
VIEW A, B & C -
Use medium to heavy weight woven fabrics or pre-quilted fabrics. Placemats
are double except when using quilted fabric. The outside edges of the
placemats can be finished with bias tape, satin stitching or sewed and
turned. Fabric requirement is for one placemat if made double and two if
made from a single layer of fabric.
|
|
Fabric 45" (115 cm)
Wide - 3/8 yd (0.35 m). Finishing: Optional - 2 yd (1.80 m) for each
of bias tape or 20" x 14" (51 cm x 36 cm) of fusible webbing,
thread.
|
| |
|
VIEW D-
Placemat has a wide mitered hem and is stitched with optional decorative
stitching. Use medium weight woven fabric. Fabric requirement is for two
placemats.
|
|
Fabric 45" (115 cm)
Wide - 1/2 yd (0.50 m), thread.
|
| |
|
ROUND TABLECLOTH
with 60" (152 cm) Diameter
|
|
1 3/4 yd (1.60 m) of
60" (152 cm) wide fabric or 3 1/2 yd (3.20 m) of 45" (115 cm)
wide fabric, thread. To determine the amount of fabric required for other
sizes of tablecloths, see Instruction sheet.
|
| |
|
TOASTER COVER
|
|
VIEW A-
Fits toaster the following size: Length: 14" (35 cm), Width: 4
1/2" (11 cm), Height: 7" (18 cm).
|
|
Instructions are included
for making a cover to fit any size toaster. Use heavy weight woven or
pre-quilted fabric.
|
|
Fabric 45" (115 cm)
Wide - 3/8 yd (0.35 m) , 3 yd (2.75 m ) of bias tape, thread.
|
| |
|
View B: Fits toaster
the following size: Length: 10" (25 cm), Width: 7" (18 cm),
Height: 7" (18 cm). Use heavy weight woven or pre-quilted
fabric.
|
|
Fabric 45" (115 cm)
Wide - 1/4 yd (0.25 m), 2 1/2 yd (2.30 m) of bias tape, thread.
|
|
pat-003-813-2284
